- 2021 01-27
- PVB RESIN Q&A(6) Q: When polyvinyl butyral resin is used in the glass tank of the mixer. The glass tank is double-layered and PVB resin is used in the middle. I want the effect to be good transparency, good elasticity, sound absorption and high temperature
- 2021 01-27
- PVB RESIN Q&A(5) Q: PVB resin is used on ceramic wafers. The solvents used are ethanol and ethyl acetate, and the other components are dibutyl phthalate. But PVB became rubbery. I want to know which type will improve the effect? A: For type with a viscosity...
- 2021 01-27
- PVB RESIN Q&A(4) Q: When applying polyvinyl butyral resin to casting coatings, which viscosity type should I choose? A: 8 seconds or 5 seconds. Summary: There are two measurement units for the viscosity of TANYUN PVB RESIN, one is second and the other is millipascal second. The measurement unit can be converted.
- 2021 01-27
- PVB RESIN Q&A(3) Q: PVB resin is used to make hot-melt medical pressure-sensitive adhesive, that is, medical tape, which type is used? A: High viscosity 80-120 seconds should be used. Summary: There are two measurement units for the viscosity of TANYUN PVB RESIN, second and millipascal second. The measurement unit can be converted.
- 2021 01-26
- PVB RESIN Q&A(2) Q: When polyvinyl butyral resin is used in screen printing inks, I want to dissolve pvb, what is the ratio of solvent to pvb? A: The adding amount of pvb resin should be about 5% of the total weight of the ink.
- 2021 01-26
- PVB RESIN Q&A(1) Q: Polyvinyl Butyral Resin is used in screen printing ink. Which type should I use? A: Two types, TB-03 or TB-08. Summary: TANYUN PVB RESIN has more than ten types according to different viscosity, corresponding to different application scenarios. You can contact ty@tanyunchem.com to obtain the corresponding TDS and MSDS.
- 2021 01-20
- Preparation of 3,3'-Dimethyl-9,9'-Bianthracene with 2-Methylanthraquinone In terms of organic synthesis, we have researched and developed a synthetic method of 3,3'-dimethyl-9,9'-bianthracene, which includes the following steps:(1) Add 2-methylanthraquinone, acetic acid, tin granules and 37% (mass) concentrated h
- 2021 01-19
- Does antioxidant DPPD emit an odor when heated? Q: Does the rubber antioxidant DPPD emit an odor when heated? Can it act as a harmful metal inhibitor?A: The initial melting point of rubber antioxidant DPPD is about 140C, and the melting point is about 220C. If the customer uses it at 200...
- 2021 01-19
- What effect will antioxidant DPPD have on rubber products? Q: The rubber antioxidant DPPD (S grade) has high metal content and strong hue. What kind of effect will it have on rubber products?A: It has an effect on the hue and aging resistance of rubber products.
- 2021 01-19
- When apply antioxidant DPPD to polyolefin heat shrinkable tubing Q: Is it possible to apply the rubber antioxidant DPPD (S grade) to polyolefin heat shrinkable tubing? What is the ratio of addition?A: The content of the relevant antioxidant is 0.5%-1.5% of the resin content, or about 1 part to 3 parts. I...
Hot Products
Venue
Headquarters: No. 75,Xinhu Street,Xishi District, Yingkou,Liaoning, China 115004
Shenzhen Office: 4305B, Southeast Rongchao Economic and Trade Center, Intersection of Jintian Road and Fuzhong Road, Futian District, Shenzhen Guangdong
Shenzhen Office: 4305B, Southeast Rongchao Economic and Trade Center, Intersection of Jintian Road and Fuzhong Road, Futian District, Shenzhen Guangdong
Venue
Headquarters: No. 75,Xinhu Street,Xishi District, Yingkou,Liaoning, China 115004
Shenzhen Office: 4305B, Southeast Rongchao Economic and Trade Center, Intersection of Jintian Road and Fuzhong Road, Futian District, Shenzhen Guangdong
Shenzhen Office: 4305B, Southeast Rongchao Economic and Trade Center, Intersection of Jintian Road and Fuzhong Road, Futian District, Shenzhen Guangdong
