- 2020 11-30
- What are the indicators that cannot be tested for boron nitride? Q: What are the indicators that cannot be tested for boron nitride?A: Tap density, thermal conductivity (higher than 1.35, but not tested), carbon content, nitrogen content, agglomeration number, infrared image detection, crystal phase, the...
- 2020 11-30
- What is the particle size range of boron nitride suitable for cosmetics? Q: What is the particle size range of boron nitride suitable for cosmetics?A: 13~15um, good crystallinity
- 2020 11-27
- After hexagonal boron nitride is immersed in silica sol Q: After hexagonal boron nitride is immersed in silica sol, can its surface be completely covered by silica sol?A: No.
- 2020 11-27
- How much high temperature can boron oxide withstand? Q: How much high temperature can boron oxide withstand?A: 800 degrees.
- 2020 11-27
- What is the limit oxidation temperature of boron nitride? How to strengthen the oxidation resistance Q: What is the limit oxidation temperature of boron nitride? How to strengthen the oxidation resistance when the process temperature exceeds the limit temperature?A: The limit oxidation temperature of boron nitride is 900C. The larger the p...
- 2020 11-27
- What is the proportion of boron nitride added to the lubricant? Q: What is the proportion of boron nitride added to the lubricant?A: Around 17%.
- 2020 11-27
- Can boron nitride be filled with resin products? Q: Can boron nitride be filled with resin products? If possible, do you need to do special treatment?A: Yes.
- 2020 11-27
- 5 micron high-temperature boron nitride to be dissolved in the glue (to improve thermal conductivity) Q: The customer used 3 micron and 5 micron high-temperature boron nitride to be dissolved in the glue (to improve thermal conductivity), but a small amount of boron nitride was not dispersed. The customer would like to ask how can the agglo...
- 2020 11-27
- Can high temperature boron nitride be sprayed with an electrostatic spray gun? Q: Can high temperature boron nitride be sprayed with an electrostatic spray gun?A: Yes.
- 2020 11-27
- To add high-temperature boron nitride to the release agent Q: To add high-temperature boron nitride to the release agent, the main materials for the heat insulation material are calcium silicate and liquid aluminum. What kind of solvent should be added to make high-temperature boron nitride a relea...
Hot Products
Venue
Headquarters: No. 75,Xinhu Street,Xishi District, Yingkou,Liaoning, China 115004
Shenzhen Office: 4305B, Southeast Rongchao Economic and Trade Center, Intersection of Jintian Road and Fuzhong Road, Futian District, Shenzhen Guangdong
Shenzhen Office: 4305B, Southeast Rongchao Economic and Trade Center, Intersection of Jintian Road and Fuzhong Road, Futian District, Shenzhen Guangdong
Venue
Headquarters: No. 75,Xinhu Street,Xishi District, Yingkou,Liaoning, China 115004
Shenzhen Office: 4305B, Southeast Rongchao Economic and Trade Center, Intersection of Jintian Road and Fuzhong Road, Futian District, Shenzhen Guangdong
Shenzhen Office: 4305B, Southeast Rongchao Economic and Trade Center, Intersection of Jintian Road and Fuzhong Road, Futian District, Shenzhen Guangdong
