Search -

location： Home » Search » Search：

[FAQ]Polyvinyl butyral with a viscosity of 8-10 seconds is used as the raw material of the spray bandage2020-11-30- 14:34: Q: Polyvinyl Butyral with a viscosity of 8-10 seconds is used as the raw material of the spray bandage. It has good viscosity but will fall off when exposed to water.A: Use Polyvinyl Butyral with a viscosity of 12-15 seconds, high butyl, an...; Read（0）

[FAQ]When Polyvinyl Butyral is used as a peelable anti-rust film2020-11-30- 14:28: Q: When Polyvinyl Butyral is used as a peelable anti-rust film, which type can have good film-forming properties and be waterproof and anti-rust?A: Type TB-17.; Read（0）

[FAQ]Can Rubber Antioxidant H act as a harmful metal inhibitor?2020-11-30- 10:39: Q: Rubber Antioxidant H, does it smell when heated? Can it act as a harmful metal inhibitor?A: Antioxidant H has a melting point of about 140C and a boiling point of about 220C. If the customer uses it at 200C, it will produce an obvious odor. The...; Read（0）

[FAQ]Rubber Antioxidant H, with high metal content and strong hue2020-11-30- 10:33: Q: Rubber Antioxidant H, with high metal content and strong hue, will it have any effect on rubber products?A: It has an influence on the hue and aging resistance of rubber products.; Read（0）

[FAQ]When apply rubber antioxidant to polyolefin heat shrinkable tubing2020-11-30- 10:29: Q: Is it possible to apply rubber antioxidant H to polyolefin heat shrinkable tubing? What is the ratio of addition?A: It is concluded that the content of the relevant antioxidant H is 0.5%-1.5% of the resin content, or about 1 part to 3 parts. It...; Read（0）

[FAQ]What is the proportion of high temperature boron nitride used in steel mold release agent?2020-11-30- 10:15: Q: What is the proportion of high temperature boron nitride used in steel mold release agent?A: Add 16%.; Read（0）

[FAQ]Has high-temperature boron nitride been treated with silicon?2020-11-30- 10:15: Q: Has high-temperature boron nitride been treated with silicon?A: No, it cannot be detected.; Read（0）

[FAQ]Can boron nitride be used for radiation protection?2020-11-30- 10:04: Q: Can boron nitride be used for radiation protection? Which type is appropriate?A: Yes, boron nitride of 15 microns is recommended.; Read（0）

[FAQ]Can boron nitride be used in heating pipes? play a role in heat conduction?2020-11-30- 10:02: Q: Can boron nitride be used in heating pipes? The material is PE-RT plastic pipe, the temperature used is about 60 degrees, can boron nitride play a role in heat conduction?A: Yes, 16 microns is recommended, and the addition ratio is about...; Read（0）

[FAQ]Is boron nitride suitable for GEMA injection system or manual injection system2020-11-30- 09:59: Q: Is boron nitride suitable for GEMA injection system or manual injection system, which is used for aluminum extrusion?A: GEMA injection system or manual injection system can be used, 5 micron type is recommended.; Read（0）

[FAQ]What is the maximum specific surface area of boron nitride?2020-11-30- 09:56: Q: What is the maximum specific surface area of boron nitride? Oxygen content?A: The specific surface area is 18. The oxygen content is about 0.3.; Read（0）

[FAQ]What types of boron nitride used as adhesives for steel release agent2020-11-30- 09:53: Q: What types of boron nitride used as adhesives for steel release agent? A: Boron nitride of 10 microns is recommended.; Read（0）

[FAQ]What types of boron nitride are used as binders for fillers?2020-11-30- 09:51: Q: What types of boron nitride are used as binders for fillers (coated on cans and iron)? A: boron nitride of ?10 microns is recommended.; Read（0）

[FAQ]What types of boron nitride used as adhesives for electronic bonding?2020-11-30- 09:49: Q: What types of boron nitride used as adhesives for electronic bonding? A: Boron nitride of ?16 microns is recommended for thermal insulation.; Read（0）

[FAQ]Precautions when using water as a solvent for boron nitride2020-11-30- 09:45: Q: Precautions when using water as a solvent for boron nitrideA: The water temperature should not exceed 60℃, otherwise the boron nitride will decompose. Water mixes with boron nitride, not fusion.; Read（0）

[FAQ]Can white graphite replace black graphite?2020-11-30- 09:42: Q: Can white graphite replace black graphite?A: Yes, the specific particle size depends on customer process requirements.; Read（0）

[FAQ]What is the instrument for detecting particle size of boron nitride?2020-11-30- 09:41: Q: What is the instrument for detecting particle size of boron nitride?A: Particle size detector.; Read（0）

[FAQ]What are the indicators that can be tested for boron nitride?2020-11-30- 09:40: Q: What are the indicators that can be tested for boron nitride?A: Specific surface area, free boron, D50, particle size analysis chart.; Read（0）

[FAQ]What are the indicators that cannot be tested for boron nitride?2020-11-30- 09:38: Q: What are the indicators that cannot be tested for boron nitride?A: Tap density, thermal conductivity (higher than 1.35, but not tested), carbon content, nitrogen content, agglomeration number, infrared image detection, crystal phase, the...; Read（0）

[FAQ]What is the particle size range of boron nitride suitable for cosmetics?2020-11-30- 09:35: Q: What is the particle size range of boron nitride suitable for cosmetics?A: 13~15um, good crystallinity; Read（0）

First Previous <... 3 4 5 6 7 8 9 10 11 12 ...> Next Last

Relevant Search

Spotlight

2020, TANYUN Chemical reviews the history and looks to the future: On the 49th anniversar...